Larger Image             Tell A Friend

Mammo-Techline

Designed to create an effective, comfortable reading environment for mammography interpretation. The internal shutter, as a standard feature, provides the flexibility of reading both 18 x 24 cm and 24 x 30 cm mammography film formats, and is available in double and single tier configurations.

The 3061290 features two viewing surfaces for diagnostic comparison of Base Line and Current Mammograms. It can be configured for desk top mounting which features a vertical top viewing surface and a bottom viewing surface angled out at 20 degrees for seated mammographic viewing. It can also be surface wall mounted featuring two viewing surfaces positioned vertically on top of one another for facilities with minimal counter or desk space.

The 3061291-angulated, one tier for desk-top mounting.
The 3061292-not angulated, one tier for wall mounting.

Electrical: Each Mammo-Techline draws 0.93 A per tier.
Luminance: Each viewing panel emits a luminance level of 5750 NIT.
Lamps: Each tier contains three GE #F30T12/D or equivalent lamps.
Ballasts: Each tier contains a low leakage rapid start electronic ballast which does not require an external starter. These ballasts are thermally protected and are U.L. and C.S.A. listed components.
Construction: Rigid welded steel construction
Film Grip: The Tech-Grip roller gravity film holding system is maintenance free and requires no field adjustments.
Shutter: Interior mechanical shutters are standard on all configurations. This feature allows the reader to eliminate harmful extraneous light from shining in a reader’s eyes when reading 18 x 24 cm mammography film formats. When the shutter is retracted, the full viewing area is opened creating the viewing area for 24 x 30 cm mammography film formats
Diffusing Panel: Shatter resistant and secured flush with the face of the unit. The panel is easily removed without tools facilitating quick and easy replacement of lamps. The material is U.L. recognized Plexiglas thermoplastic.
Switches: Each viewing area is controlled by a two position on/off rocker switch, located on the right hand side of each fixture.
Listing: Meets U.L. and C.S.A. listing requirements.