Imaging Chair

For most imaging procedures, the patient lies on a table, which is then placed in the proper position. In some cases, the table restricts accessibility of the imaging equipment and patient comfort. Cone Instruments offers a chair which puts the patient at ease, in addition to alternative patient positioning for nuclear medicine procedures. You can move the chair around between and over most camera pedestals. The Imaging Chair is fully adjustable. With the back support and armrests in place, it is a chair, which can swivel 360°. Once wheeled to the proper location, you can anchor the chair while the patient is seated by engaging the foot-operated wheel locks on the four casters. The height of the chair can be increased from 41" to 48" by stepping on the foot pump arm. Hold the arm down and the chair slowly lowers to its minimum height. If you raise the foot pump arm, it locks into that position, which restricts the swivel action of the chair. At the rear of the seat cushion is a locking handle which allows you to move the seat of the chair 4" to the left or right, while the base remains anchored. For lateral and posterior access, the back support and armrests drop out of the way with a simple tug of the corresponding pull pin. The seat and back are upholstered with 2" foam and vinyl cover. The wide armrest allows the Imaging Chair to double as an injection chair. CHAIR BACK AND ARMS FOLD AWAY FROM IMAGING AREA WITH THE TOUCH OF A BUTTON. SPECIFICATIONS: Overall Height: 41", raises to 48" (104 to 122cm) Seat Height: 19" raises to 26" (48 to 66cm) Overall Width: 25" (64cm) Weight: 75lbs (35 kgs.) Finish: Black baked enamel Wheels: 2" (5cm) with locks Seat: 2" foam, 2-tone gray, 17" x 11" (43 x 28cm) Seat Back: 19" (48cm) above seat top Weight: 100lbs

Review Summary

Imaging Chair

Imaging Chair

#N131127
Imaging Chair
$3450.00
Estimated ship date of 01/01/2018
Request a Catalog